在零件表面上加工出西文的方法如下:
在Drafting模塊中,在任一張新的Drawing上寫上要刻的西文, 如:UGS,并把它們輸出為一 .cgm格式的文件。
輸入 .cgm 的目錄和文件名。
Polylines--on,OK
2. 把字符讀入模型中,并安放于一合適位置。
Application Modeling
File Import CGM,選擇字符UGS所在目錄及文件名(.cgm),字符被讀入模型空間。
Edit Transform, 把字符安放到一合適的位置上。
3. 用Fixed/Variable Contour 在零件上刻字,驅動方法(Drive Method)為Curve / Point,把字符作為Drive Geometry.
Application Manufacturing
Operation Type ---------- Fixed/Variable Contour
選擇刀具
Part Geometry ----------- 模型表面或實體
Part Stock < 0
Drive Method ------------ Curve/Point
Drive Geometry -----------字符UGS
注意:選擇每條曲線時,光標的位置應在同一側,使箭頭方向一致。選完一個字后,Local Lift at End ----On。
定義Projection Vector.
定義其他參數。
生成刀軌。
另外,如果書寫的為空心字,Drive Method用Boundary,Drive Geometry 為空心字。